
****************************************************************************
*                                                                          *
*                         The Ethernet Adapter                             *
*                                                                          *
*                NDIS Driver for Windows for Worgroups 3.1                 *
*                                                                          *
*                               Ver. 2.02                                  *
*                                                                          *
*                              README file                                 **                                                                          *
****************************************************************************

1. Introduction:

   The Ethernet Adapter Windows for Workgroups 3.1 Driver conforms to 3Com/
   Microsoft Network Driver Interface Specification v2.01 (Oct. 8, 1990). It
   supports Microsoft Windows for Workgroups v3.1 enviroment.


2. Contents of the Subdirectory:

      RETH.DOS        The NDIS driver for DOS.

      OEMSETUP.INF    A description file for installing the Ethernet NDIS
                      driver under Windows for Workgroups 3.1.


3. Installation

 * Take the following steps at the first time you setup Windows for Work-
   groups on your hard disk:

   1) When the 'Network Adapters' window is displayed, choose 'Unlisted or
      Updated Network Adapter'.

   2) When the 'Install Driver' window appears, insert the Distribution Disk-
      ette into drive A:, and then enter 'A:\WFW31' and select 'OK'.

   3) When the 'Unlisted Or Updated Network Adapter' window is re-displayed,
      choose 'E2k/E1k/PCMCIA Ethernet'.

   4) After Windows for Workgroups has read the E2k/E1k/PCMCIA Etherent Driver
      completely, the 'E2k/E1k/PCMCIA Ethernet' window will be re-displayed.


 * If the Windows for Workgroups has been installed and you want to change
   the network adapter to E2k/E1k/PCMCIA Ethernet Adapter, follow the pro-
   cedure described below.

   1) Select 'Control Panel' from Main group in Windows Program Manager.

   2) In the 'Control Panel' window, select the 'Network' icon.

   3) In the 'Network Settings' window, select 'Adapters'.

   4) In the 'Network Adapters' window, select the 'Remove' button to cancel
      the previous settings.

   5) Select the 'Add' icon, and the 'Install New Network Adapter' will be
      displayed.  Or, when 'Network Adapters' window is displayed,  choose
      'Unlisted or Updated Network Adapter'.

   6) When the 'Install Driver' window appears, insert the Distribution Disk-
      ette into drive A:, and then enter 'A:\WFW31' and select 'OK'.

   7) When the 'Unlisted Or Updated Network Adapter' window is re-displayed,
      choose 'E2k/E1k/PCMCIA Ethernet'.

   8) After Windows for Workgroups has read the E2k/E1k/PCMCIA Ethernet driver
      completely, the 'E2k/E1k/PCMCIA Ethernet' window will be re-displayed.

   9) In the 'Network Adapters' window, select the 'Close' button.

  10) In the 'Network Settings', select 'Restart Computer'.

